|
Introduction :
In Shresta, we blend
environmental and economic considerations into decisions about
how to design and produce products. We strive to introduce
meaningful solutions and technologies for our customers and
end users. Our aim is to explore new ways to improve
solution and to offer an exciting range of products that
enhance your lives, anticipating your needs. Our new range of
eco friendly electronic dimmable ballast solutions are
targeted at customers working towards building an energy
conservative society.
Features :
- The lamp power can be reduced down to < 3%
- Constant power & light intensity
output for a wide range of input AC voltage
- 1-10v analog input for dimming control
- Programmed pre-heat start
- Active power factor correction
- Very low power consumption
- Total
Harmonic Distortion
Specification :
| LAMP |
| Type |
T5, T8, PLL |
| Watts |
1 x 36W / 2 x 36W / 1 x 28W / 2 x 28W and below wattage lamps |
|
|
| |
| Analog Dimming |
1 – 10V Analog Voltage |
| Digital Dimming |
DALI Interface (Optional)
|
|
|
|
|
| Operating Frequency |
>40KHz |
| Power Factor |
>0.98 |
| Ignition Time |
<2 Seconds |
| Dimmable Range |
100% to 10% Light Output |
| Ballast Controller |
Controller to switch ON/OFF using Remote Controller |
| Automation Option |
Can be extended
|
|
|
|
|
| Over Voltage |
Continuous at 320 VAC / 2 Hours at 350 VAC |
| Lamp Removal Protection |
Yes |
| Short Circuit Protection |
Yes |
| Auto Restart |
Yes
|
|
|
|
|
|
Power input |
150 VAC to 320 VAC |
| Frequency |
50Hz +/- 10% |
|
|
|
|
| Dimension |
27mm (W) x 330mm (L) x 21mm (H) – 2x36W T8 Dimmable Ballast |
|
|
|
|
| Environmental |
| Operating Temperature |
0 to 55°C (32 to 131°F), 5 to 95%RH |
| Storage Temperature |
-20 to 85°C (-4 to 185°F), 5 to 95%RH |
|
|
|
